C-5
Cisco 1700 Router Hardware Installation Guide
78-5405-03
Appendix C Installing and Upgrading Router Memory
Installing a Mini-Flash Module
You can install a mini-Flash module (shown in Figure C-3) to increase the amount
of Flash memory in the router.
Figure C-3 Mini-Flash Module
Take the following steps to install a mini-Flash module on the motherboard:
Step 1 Locate the module slot on the motherboard, shown in
Figure C-2.
Step 2 Hold the module with the notched edge away from you.
Step 3 Insert the module into the module slot at a 45-degree
angle, as shown in Figure C-4.
Step 4 Press down firmly on the module until you hear a
clicking sound and the module is firmly inserted in the
slot.
Notched edge
12612
To Next Page
Loading...
