Appendix C Installing and Upgrading Router Memory
C-6
Cisco 1700 Router Hardware Installation Guide
78-5405-03
Figure C-4 Installing a Mini-Flash Module
Removing a Mini-Flash Module
Take the following steps to remove a mini-Flash module:
Step 1 Insert your index finger between the mini-Flash module
and the mini-Flash module release lever, as shown in
Figure C-5.
Step 2 Firmly pull the release lever away from the module until
the module pops up and away from the module slot.
Mini-Flash module slot
45 degrees
12613
WAN interface card slot
Notched edge
To Next Page
Loading...
