CHAPTER
Preparing to Install the Router 2-1
2
Preparing to Install the Router
This chapter describes important information to consider before you begin to install a
Cisco 2600 series router, and includes the following sections:
• Safety Recommendations on page 2-1
• General Site Requirements on page 2-4
• Preparing to Connect to a Network on page 2-7
After you have completed this chapter, proceed to Chapter 3 “Installing the Router” for
installation instructions.
Safety Recommendations
Follow these guidelines to ensure general safety:
• Keep the chassis area clear and dust-free during and after installation.
• Put the removed chassis cover in a safe place.
• Keep tools away from walk areas where you and others could fall over them.
• Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf
and roll up your sleeves.
• Wear safety glasses if you are working under any conditions that might be hazardous to
your eyes.
• Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe.
To Next Page
Loading...
