Setting Up the Chassis
Cisco 2600 Series Hardware Installation Guide
3-4
Step 2 Place the router upside down on a smooth, flat surface.
Step 3 Peel off the rubber feet from the black adhesive strip and place them
adhesive-side down onto the five round, recessed areas on the bottom of the
chassis. (See Figure 3-2.)
Figure 3-2 Installing the Rubber Feet
Step 4
Place the router right-side up on a flat, smooth, secure surface.
Caution Do not place anything on top of the router that weighs more than 10 pounds
(4.5 kg). Excessive weight on top could damage the chassis.
Fan
H4795
To Next Page
Loading...
