Cisco 2611 - Router - EN - Page 53

Installing the Router 3-15
Connecting to a Network
Figure 3-11 Connecting an Ethernet Hub
• Cisco 2612 or Cisco 2613—Connect the Token Ring port (RJ-45) to a switch such as a
Cisco Catalyst 3900, as shown in Figure 3-12. To ensure agency compliance with
electromagnetic emissions requirements (EMI), ensure that the lobe cable is shielded.
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
Cisco 2611
100-240V– 1A
50/60 Hz 47 W
W0
AUX
CONSOLE
ETHERNET 0
ACT
LINKACTETHERNET 1LINK
10BaseT cable
Ethernet 10BaseT
port (RJ-45)
10BaseT hub
or switch
H11494