Troubleshooting the Router A-7
Reading the LEDs
Figure A-6 shows the location of the Cisco 2620 rear-panel LEDs and Figure A-7 shows
the location of the Cisco 2621 rear-panel LEDs. Table A-4 describes these LEDs.
Figure A-6 Cisco 2620 Rear-Panel LEDs
Table A-3 Cisco 2612 and Cisco 2613 Rear-Panel LEDs
LED Description
LINK When on, a link has been established with the hub or switch at
the other end of the cable.
ACT Packets are being transmitted or received on the Ethernet
interface.
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
WIC
2A/S
Cisco 2620
W0
Link
FDX
AUX
CONSOLE
10/100 ETHERNET 0/0
14325
10/100BaseT
Ethernet 0/0
(RJ-45)
Auxiliary
port (RJ-45)
Console
port (RJ-45)
Link
LED
FDX
LED
100 Mbps
Mbps
LED
To Next Page
Loading...
