Cisco 2600 Series Hardware Installation Guide
Command Descriptions
C-6
• meminfo [-l]—The meminfo command with the -l option displays supported DRAM
configurations. The following example shows an example of the meminfo -l command:
rommon 10 > meminfo -l
Supported memory configurations:
DIMM 0 DIMM 1
-------------------
4M
8M-DUAL
16M
32M-DUAL
4M
4M 4M
4M 8M-DUAL
4M 16M
4M 32M-DUAL
8M-DUAL
8M-DUAL 4M
8M-DUAL 8M-DUAL
8M-DUAL 16M
8M-DUAL 32M-DUAL
16M
16M 4M
16M 8M-DUAL
16M 16M
16M 32M-DUAL
32M-DUAL
32M-DUAL 4M
32M-DUAL 8M-DUAL
32M-DUAL 16M
32M-DUAL 32M-DUAL
• reset or i—Reset and initialize the router, similar to power on.
• tftpdnld—Download an image using TFTP from a remote server.
To Next Page
Loading...
