Cisco 2800 Series Configuring

Configuring Radio Settings on an Access Point
Feature Information for Configuring Radio Settings on an Access Point
30
Cisco Compatible Extensions Information
Element
12.4T This feature allows a Cisco access point to inform Cisco
Compatible Extension client devices about the
Cisco-compatible release version that the access point
supports.
The following sections provide information about this
feature:
• Enabling and Disabling Aironet Extensions on an
Access Point, page 17
Configurable Radio Transmit Power 12.4T This feature allows a user to set the transmit power of the
access point.
The following sections provide information about this
feature:
• Configuring Radio and Client Device Power Levels on
an Access Point, page 6
Dynamic Frequency Selection (DFS) and IEEE
802.11h Transmit Power Control
12.4T This feature allows a user to block groups of channels to
prevent an access point from selecting them when DFS is
enabled.
The following sections provide information about this
feature:
• Configuring Dynamic Frequency Selection on an
Access Point, page 10
IEEE 802.11 Wireless Standards Support 12.4T This feature provides support for 802.11 standards, which
allows you to set channels, transmission rates, and
power-save mode, among other configurable fields.
The following sections provide information about this
feature:
• Configuring Radio and Client Device Power Levels on
an Access Point, page 6
IEEE 802.11a Support 12.4T This feature provides support for 802.11a standards, which
allows you to set channels, transmission rates, and
power-save mode, among other configurable fields.
The following sections provide information about this
feature:
• Configuring Radio and Client Device Power Levels on
an Access Point, page 6
IEEE 802.11b Support 12.4T This feature provides support for 802.11b standards, which
allows you to set channels, transmission rates, and
power-save mode, among other configurable fields.
The following sections provide information about this
feature:
• Configuring Radio and Client Device Power Levels on
an Access Point, page 6
Table 7 Feature Information for Configuring Radio Settings on an Access Point
Feature Name Releases Feature Information

Cisco 2800 Series Specifications

General

Power Supply	Internal power supply
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Power Device	Internal power supply
Operating System	Cisco IOS
Integrated Services	Security, voice
WAN Interfaces	T1/E1, Serial
LAN Interfaces	Fast Ethernet, Gigabit Ethernet
Expansion Slots	4
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	IP, TCP
Remote Management Protocol	SNMP, Telnet
Features	VPN support, Quality of Service (QoS), VLAN support
Voltage Required	AC 100-240 V
Security Features	Firewall, VPN, Access Control Lists (ACLs)