Cisco 2960-S - Page 18

1-10
Catalyst 2960-S Switch Hardware Installation Guide
OL-19732-04
Chapter 1 Product Overview
Front Panel
For information about SFP modules, see the SFP module documentation and the “Installing SFP and
SFP+ Modules” section on page 2-20. For cable specifications, see Appendix B, “Connector and Cable
Specifications.”
Ta b l e 1-3 Supported SFP+ Modules
Switch Models Supported SFP+ Modules
Catalyst 2960S-48FPD-L
Catalyst 2960S-48LPD-L
Catalyst 2960S-24PD-L
Catalyst 2960S-48TD-L
Catalyst 2960S-24TD-L
SFP-10G-LR=
SFP-10G-SR=
SFP-10G-LRM=
SFP-H10GB-CU1M=
SFP-H10GB-CU3M=
SFP-H10GB-CU5M=