Cisco 3600 Series Installation Guide

5-32
Cisco 3600 Series Hardware Installation Guide
OL-2056-02
Chapter 5 Installing Memory in the Router
Closing the Router
Figure 5-26 Replacing the Cisco 3631 Router Cover
Step 4 Reinstall the cover screws.
Step 5 Reinstall the chassis on a rack or desktop.
Step 6 Reconnect network interface cables.
Step 7 Power ON the router.
Warning After wiring the DC power supply, remove the tape from the circuit breaker switch
handle and reinstate power by moving the handle of the circuit breaker to the ON
position.To seetranslationsofthevariouswarningsthatappearinthispublication,refer
to the Regulatory Compliance and Safety Information document that accompanied this
device.
1 Insert tabs and slide cover 2 Close cover
62491
1
2

Cisco 3600 Series Specifications

General

Operating System	Cisco IOS
Series	3600
Type	Modular Router
Interfaces	Ethernet, Fast Ethernet, Serial, ISDN
Routing Protocols	RIP, OSPF, EIGRP, BGP, IS-IS
Redundancy	Optional redundant power supply
Management	CLI, SNMP, Telnet
Weight	Varies depending on the specific model
Power Supply	AC or DC, optional redundant power supply