EasyManuals Logo

Cisco 3945 User Manual

Cisco 3945
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
113
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Backup Data Lines and Remote Management
Configuring Dial Backup and Remote Management Through the Console Port or Auxiliary Port
Example
The following configuration example specifies an IP address for the ATM interface through PPP and
IP Control Protocol (IPCP) address negotiation and specifies dial backup over the console port.
!
ip name-server 192.168.28.12
ip dhcp excluded-address 192.168.1.1
!
ip dhcp pool 1
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
!
! Need to use your own correct ISP phone number.
modemcap entry MY-USER_MODEM:MSC=&F1S0=1
chat-script Dialout ABORT ERROR ABORT BUSY ““ “AT” OK “ATDT 5555102\T”
TIMEOUT 45 CONNECT \c
!
!
!
!
interface vlan 1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
hold-queue 100 out
!
! Dial backup and remote management physical interface.
interface Async1
no ip address
encapsulation ppp
dialer in-band
dialer pool-member 3
async default routing
async dynamic routing
async mode dedicated
ppp authentication pap callin
!
interface ATM0
mtu 1492
no ip address
no atm ilmi-keepalive
pvc 0/35
pppoe-client dial-pool-number 1
Step 17
line [aux | console | tty | vty] line-number
[ending-line-number]
Example:
Router(config)# line aux 0
Router(config)#
Enters configuration mode for the
auxiliary interface.
Step 18
flowcontrol {none | software [lock] [in | out] | hardware
[in | out]}
Example:
Router(config)# flowcontrol hardware
Router(config)#
Enables hardware signal flow control.
Command Purpose

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3945 and is the answer not in the manual?

Cisco 3945 Specifications

General IconGeneral
Form FactorRack-mountable
Maximum Throughput75 Mbps
Product TypeRouter
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Operating SystemCisco IOS
Flash Memory256 MB
Network/Transport ProtocolIPSec
Remote Management ProtocolSNMP
Encryption AlgorithmDES, AES
FeaturesFirewall, VPN, Quality of Service (QoS), VLAN support
Interfaces2 x USB
Security FeaturesIntrusion Prevention System (IPS)
Operating Temperature32 °F to 104 °F (0 °C to 40 °C)
Storage Temperature-4 °F to 149 °F (-20 °C to 65 °C)
Humidity10 - 85% (non-condensing)
Memory2 GB
Expansion Slots4 (free) x EHWIC ¦ 2 x service module ¦ 1 x ISM ¦ 1 x CompactFlash Card

Related product manuals