EasyManuals Logo

Cisco 3945 User Manual

Cisco 3945
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #221 background imageLoading...
Page #221 background image
213
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Multi-Gigabit Fabric Communication
Cisco High-Speed Intrachassis Module Interconnect (HIMI)
NME-XD-48ES-2S-P
NME-XD-24ES-1S-P
See the Cisco EtherSwitch Feature Guide documentation at Cisco.com for configuration details,
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/miragenm.html#wp1787811.
Cisco High-Speed Intrachassis Module Interconnect (HIMI)
Cisco 3900 series and Cisco 2900 series routers use Cisco High-Speed Intrachassis Module Interconnect
(HIMI) to support SM-to-SM or SM-to-ISM communication through the MGF.
Use the connect connection-name module Module1 Channel-id1 module Module2 Channel-id2
command to establish a maximum of two HIMI connections on the Cisco 3900 series ISR routers and
one HIMI connection on Cisco 2900 series andCisco 1900 series ISRs. Module 1 and Module 2 are the
slot/port of the two modules. The Channel-id1 and Channel-id2 variables must always have a value of 0.
When two modules are configured in a HIMI connection, the modules cannot send traffic to any other
module except its HIMI-dedicated partner.
See Cisco High-Speed Intrachassis Module Interconnect (HIMI) Configuration Guide at Cisco.com for
detailed configuration instructions,
http://www.cisco.com/en/US/docs/ios/12_4/12_4_mainline/srdesfm1.html.
Note See the module documentation to validate HIMI support.
Using HIMI for VLAN Traffic Flows
For HIMI configurations, the port-level VLAN memberships are ignored on the Multi-Gigabit Fabric
(MGF). Use the connect connection-name module module1 vlan-id module module2 command to
redirect VLAN traffic flows from SM-to-SM or SM-to-ISM connections on the MGF.
The following two modules, as well as others, support VLAN traffic redirection:
Cisco Etherswitch service module
Cisco Services Ready Engine internal service module (ISM-SRE)
Note See the module documentation to validate HIMI support.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3945 and is the answer not in the manual?

Cisco 3945 Specifications

General IconGeneral
Form FactorRack-mountable
Maximum Throughput75 Mbps
Product TypeRouter
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Operating SystemCisco IOS
Flash Memory256 MB
Network/Transport ProtocolIPSec
Remote Management ProtocolSNMP
Encryption AlgorithmDES, AES
FeaturesFirewall, VPN, Quality of Service (QoS), VLAN support
Interfaces2 x USB
Security FeaturesIntrusion Prevention System (IPS)
Operating Temperature32 °F to 104 °F (0 °C to 40 °C)
Storage Temperature-4 °F to 149 °F (-20 °C to 65 °C)
Humidity10 - 85% (non-condensing)
Memory2 GB
Expansion Slots4 (free) x EHWIC ¦ 2 x service module ¦ 1 x ISM ¦ 1 x CompactFlash Card

Related product manuals