EasyManuals Logo

Cisco 3945 User Manual

Cisco 3945
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #288 background imageLoading...
Page #288 background image
280
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Radio Settings
Enabling and Disabling World Mode
SUMMARY STEPS
1. configure terminal
2. interface dot11radio {0| 1}
3. world-mode {dot11d country_code code {both | indoor | outdoor} | world-mode roaming |
legacy}
4. end
5. copy running-config startup-config
DETAILED STEPS
Use the no form of the world-mode command to disable world mode.
Command Purpose
Step 1
configure terminal Enters global configuration mode.
Step 2
interface dot11radio {0| 1} Enters interface configuration mode for the radio interface.
Step 3
world-mode
{dot11d country_code code
{both | indoor | outdoor}
| world-mode roaming | legacy}
Enables world mode.
Enter the dot11d option to enable 802.11d world mode.
When you enter the dot11d option, you must enter a
2-character ISO country code (for example, the ISO
country code for the United States is US). You can find
a list of ISO country codes at the ISO website.
After the country code, you must enter indoor,
outdoor, or both to indicate the placement of the
wireless device.
Enter the legacy option to enable Cisco legacy world
mode.
Enter the world-mode roaming option to place the access
point in a continuous world mode configuration.
Note Aironet extensions must be enabled for legacy world
mode operation, but Aironet extensions are not
required for 802.11d world mode. Aironet extensions
are enabled by default.
Step 4
end Returns to privileged EXEC mode.
Step 5
copy running-config startup-config (Optional) Saves your entries in the configuration file.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3945 and is the answer not in the manual?

Cisco 3945 Specifications

General IconGeneral
Form FactorRack-mountable
Maximum Throughput75 Mbps
Product TypeRouter
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Operating SystemCisco IOS
Flash Memory256 MB
Network/Transport ProtocolIPSec
Remote Management ProtocolSNMP
Encryption AlgorithmDES, AES
FeaturesFirewall, VPN, Quality of Service (QoS), VLAN support
Interfaces2 x USB
Security FeaturesIntrusion Prevention System (IPS)
Operating Temperature32 °F to 104 °F (0 °C to 40 °C)
Storage Temperature-4 °F to 149 °F (-20 °C to 65 °C)
Humidity10 - 85% (non-condensing)
Memory2 GB
Expansion Slots4 (free) x EHWIC ¦ 2 x service module ¦ 1 x ISM ¦ 1 x CompactFlash Card

Related product manuals