Cisco 5520 User Manual

Change the mode to Multicast-Multicast and enable Global Multicast Mode and IGMP / MLD snooping.
•
•
IPv6, GARP, Multicast Data, and VideoStream are supported on local mode APs.
New Mobility and MC Support
Cisco 5520 supports the new mobility functionality to be compatible with inter-platform IRCM and guest anchor functionality. This
platform will not function as an MC.
Look and Feel of the Cisco 5520 Wireless LAN Controller
The Cisco 5520 controller enables console redirect by default with baud rate 9600, simulating a VT100 terminal with no flow control.
The 5520 Controller has the same boot sequence as existing controller platforms.
Boot Up and Initial Configuration
•
Initial Boot Sequence
•
Boot Options
•
Loading the OS and Boot Loader
•
Loading Controller Services
Initial Controller Configuration
Configuration Wizard — As with all other controller platforms, initial boot up requires configuration using the Wizard menu.
WLAN Express Setup — As with all other controller platforms, 5520 WLC also supports the Express WLAN Setup over wired
Ethernet connection.
19

Cisco 5520 Specifications

General

Maximum Access Points	1500
Maximum Clients	20000
Form Factor	1RU
Product Series	Cisco 5500 Series
Memory	32 GB
Flash Memory	8 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 149°F (-20°C to 65°C)
Model	Cisco 5520
Ports	8 x 1GE
Redundancy	N+1
Management	CLI
Wireless Standard	802.11ac
Humidity	10% to 95% non-condensing