Cisco 7000 Series - Page 279

Index 5
10BASE-5 networks 2-5
AUI connector pinouts A-3
cables A-3
connector locks 2-27
connectors 2-26
description 2-24
interface processor
See EIP
network connections 2-5
network connections (illustration) 3-14
ports on EIP 1-25, A-3
slide-type connector locks 2-26
transceiver 1-25, 2-18, 2-25, 5-7
transmission distances 2-5
examples
clockrate command 5-48
copying
images to a Flash memory card 3-31
crc32 command 5-49
Ethernet connections 2-26, 3-14
fan failure shutdown messages 1-45
FDDI DAS ring (illustration) 2-35
invert-transmit-clock command 5-48
microcode card-type ROM | Flash file command 5-11
nrzi-encoding command 5-49
OIR messages 5-8
port addresses 1-36
ring-speed command 3-16
show controller cxbus command 5-50
show controller cxbus command output 5-11
show environment all command output 1-45
show environment command output 1-43
show environment last command output 1-43
show environment table command output 1-44
show interfaces command output 1-36
shutting down an interface 5-51
system banner 4-5
upstream and downstream neighbors 2-35
exhaust air 1-42
F
factory burn in 4-1
failure
AC source 1-41
boot-load 5-16
fans 4-4
power source 4-4
fan
control board 5-72
failure 1-45, 4-4
shutdown 1-45
tray
description 1-9, 5-72
MAS-7010FAN= FRU 5-70
replacing 5-74
fan tray
operating voltages 1-8, 4-4
Fast Ethernet Interface Processor
See FEIP
fast serial interface processor
See FSIP
fault management
Ethernet 2-24
Token Ring 2-31
FC connector 1-27
FCC agency approvals 1-5
FDDI
agency approvals 1-5
cable media 2-32
interface processor
See FIP
network connections (illustration) 3-16
optical bypass 2-35
optical bypass cable A-5
ring 2-32
standard 2-8
transmission distances 2-8
feet, chassis, removing 3-6
FEIP
cable attachment 3-14
cables and connectors 2-27
LEDs B-5
microcode EPROM location 5-11
pinouts A-4
product numbers and descriptions 1-26
See also Fast Ethernet
field-replaceable unit
See FRUs
filenames, netbooting 5-20
filler
interface processor 2-17, 5-6
filler, interface processorP 5-7
FIP
connections 2-33
description 1-26
DIN connector A-5
LEDs B-6
microcode ROM replacement 5-11
network connections (illustration) 3-16
optical bypass switch 2-35
See also FDDI
speed 1-21, 1-26
transceivers 2-32
troubleshooting 4-8
Flash
copying to 5-22
downloading images into 1-14
Flash memory