4-2
Cisco 850 Series and Cisco 870 Series Access Routers Hardware Installation Guide
OL-5331-01
Chapter 4 Router Cabling Procedures
Cabling for Nonwireless Routers
Cabling for Nonwireless Routers
Some portions of this document do not apply to nonwireless router models. Although illustrations show
the router with antennas attached, the nonwireless routers do not have antennas or connectors on the back
panel. However, except for the
“Connecting the Radio Antennas to the Wireless Router” section, the
procedures for connecting devices to the router are the same for wireless and nonwireless routers.
Typical Installations
Typical installations of the Cisco 850 series and Cisco 870 series routers are depicted in Figure 4-1
through Figure 4-4, as follows:
•
Cisco 851 and Cisco 871 router—See Figure 4-1.
•
Cisco 857 and Cisco 87 router—See Figure 4-2.
•
Cisco 876 router—See Figure 4-3.
•
Cisco 878 router—See Figure 4-4.
Figure 4-1 shows a typical installation of a Cisco 851 or Cisco 871 router. This figure shows the back
panel of a Cisco 871 router, which has two USB ports. The Cisco 851 router does not have any
USB
ports; however, the connections on the other ports are the same for both the Cisco 851 and
Cisco
871 routers.
To Next Page
Loading...
Need help?
General
