EasyManuals Logo

Cisco 892FSP User Manual

Cisco 892FSP
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
2-41
Cisco Integrated Services Router Hardware Installation Guide
Chapter 2 Installing the Router
Installing the Cisco 860, 880, 890 ISR
Equipment, Tools, and Connections
This section describes the equipment, tools, and connections necessary for installing your Cisco 860
series, 880 series, and 890 series ISRs. It contains the following topics:
Items Shipped with your Router, page 2-41
Additional Items, page 2-41
Connections, page 2-42
Ethernet Devices, page 2-42
Items Shipped with your Router
Unpack the box and verify that all items listed on the invoice were shipped with the router.
Table 2-1 lists the items and their quantities that are shipped with each router model.
Additional Items
The following items are not shipped with the router but are required for installation:
ESD-preventive cord and wrist strap.
Screws for mounting the router on a wall:
Two number-10 wood screws (round- or pan-head) with number-10 washers, or two number-10
washer-head screws, for mounting on a wall stud. The screws must be long enough to penetrate
at least 3/4 in. (20 mm) into the supporting wood or metal wall stud.
Table 2-1 Items and Their Quantities That Are Shipped with the Cisco 860 Series, Cisco 880
Series, and Cisco 890 Series ISRs
Item
Cisco 860
Series
Routers
Cisco
860VAE
Series
Routers
1
1. By default, no cables are shipped with Cisco 860VAE models unless requested through the dynamic configuration tool.
Cisco 880
Series
Routers
Cisco 890
Series
Routers
Straight-through RJ-45 Ethernet cable 1 1 1
ADSL RJ-11-to-RJ-11 straight-through cable———1
RJ-11 DSL
2
cable
2. DSL = digital subscriber line.
1
3
3. Shipped with Cisco 867 models only.
n/a 1
4
4. Shipped with Cisco 886, 887, 887M, and 886-J models only.
1
DSL RJ-45-to-dual-RJ-11 breakout cable n/a 1
5
5. Shipped with Cisco 888E models only.
1
RJ-45-to-DB-9 console cable 1 1 1
External 12 VDC power supply adapter 1111
AC power supply cable with cable retention clip1111
Cisco Configuration Professional (Cisco CP) CD
6
6. Cisco CP is optional by order and available only on some SKUs.
1111

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 892FSP and is the answer not in the manual?

Cisco 892FSP Specifications

General IconGeneral
Product TypeRouter
Form FactorDesktop
Console Ports1 x RJ-45
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
RAM512 MB
Flash Memory256 MB
Power DeviceInternal power supply
Ports8 x LAN, 1 x WAN, 1 x USB, 1 x Console
WirelessNo
Operating SystemCisco IOS
WAN Ports1 x 10/100/1000Base-T
LAN Ports8
Security FeaturesFirewall, VPN support, IPSec, SSL, 3DES, AES
Routing ProtocolsBGP, OSPF, EIGRP, RIP
Network / Transport ProtocolIPSec
Remote Management ProtocolSNMP, Telnet, SSH, HTTP, HTTPS
FeaturesQuality of Service (QoS), VLAN Support, DHCP Server, NAT, IPv6 Support
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Voltage RequiredAC 120/230 V (50/60 Hz)
Interfaces8 x LAN - RJ-45, 1 x WAN - RJ-45, 1 x Console - RJ-45

Related product manuals