Revised: January 25, 2017,
Checking the Access Point LEDs
Access Point Status LEDs
Regarding LED status colors, it is expected that there will be small variations in color intensity and hue
from unit to unit. This is within the normal range of the LED manufacturer’s specifications and is not a
defect.
Note
The access point status LED indicates various conditions and are described in Table 7: LED Status Indications, on page 61.
Table 7: LED Status Indications
Message MeaningStatus LEDMessage Type
DRAM memory test in progressBlinking greenBoot loader status sequence
DRAM memory test OK
Board initialization in progress
Initializing FLASH file system
FLASH memory test OK
Initializing Ethernet
Ethernet OK
Starting operating system
Initialization successful
Normal operating condition, but no
wireless client associated
Chirping GreenAssociation status
Normal operating condition, at least one
wireless client association
Green
Software upgrade in progressBlinking amberOperating status
Discovery/join process in progressCycling through green, red, and amber
Access point location command invokedRapidly cycling through red, green,
amber, and off.
Ethernet link not operationalBlinking red
To Next Page
Loading...
