Cisco Aironet 2802I User Manual

GETTING STARTED GUIDE
Cisco Aironet 2800 Series Access Points
First Published: December 12, 2016

Cisco Aironet 2802I Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Frequency band	2.412 - 2.472, 5.745 - 5.825 GHz
Channel bandwidth	160 MHz
Channels quantity	18 channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11n, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3at
Data unit aggregation	A-MSDU, A-MPDU
Ethernet LAN data rates	100, 1000 Mbit/s
Maximum data transfer rate	5200 Mbit/s
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Placement	Ceiling, Wall
Certification	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1, EN 50155
Product color	White
Cable lock slot type	Kensington
Antenna type	Internal
Antenna gain level (max)	6 dBi
Flash memory	256 MB
Internal memory	1024 MB
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-SIM, EAP-TLS, EAP-TTLS, MSCHAPv2, WPA, WPA2
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4572 m
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Number of products included	1 pc(s)

Weight and Dimensions

Depth	220.4 mm
Width	220 mm
Height	55.1 mm
Weight	1600 g

Summary

GETTING STARTED GUIDE

About the Access Point

Antennas and Radios

Safety Instructions

Preparing the AP for Installation

Installation Overview

Performing a Pre-Installation Configuration

Mounting and Grounding the Access Point

Powering the Access Point

Configuring and Deploying the Access Point

The Controller Discovery Process

Explains how access points discover and join a controller using the CAPWAP protocol.

Deploying the Access Point on the Wireless Network

Checking the Access Point LEDs

Troubleshooting the Access Point to Cisco Controller Join Process

Important Information for Controller-based Deployments

Configuring DHCP Option 43

Declarations of Conformity and Regulatory Information

Manufacturers Federal Communication Commission Declaration of Conformity Statement

Presents the FCC declaration of conformity for the Cisco Aironet 2800 Series Access Points.

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC & Medical Directive 93/42/EEC

Declaration of Conformity for RF Exposure

Generic Discussion on RF Exposure

Discusses compliance with national and international standards for human exposure to radio frequencies.

This Device Meets FCC Guidelines for Exposure to Radio Waves

Confirms the device meets FCC guidelines for radio wave exposure, including separation distances.

This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves

Additional Information on RF Exposure

Declaration of Conformity Statements

Obtaining Documentation and Submitting a Service Request