Need help?Do you have a question about the Cisco aironet 2800 series and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz and 5 GHz |
|---|---|
| MIMO | 4x4 |
| Spatial Streams | 4 |
| Wi-Fi Standards | 802.11a/b/g/n/ac |
| Ethernet Ports | 1 x Gigabit Ethernet |
| Power Options | 802.3at PoE |
| Antenna | Internal or external antennas |
| Mounting | Ceiling, wall |
| Security | WPA2, 802.1X, AES |
| Management | Cisco Prime Infrastructure |
Lists SKUs and their descriptions for AP models.
Lists minimum software versions required for AP 2800 and AP 3800.
Details physical and feature differences between AP 2800 and AP 3800.
Compares key features between the Cisco Aironet 2800 and 3800 series.
Illustrates and describes the physical ports on the AP 2800 and AP 3800.
Explains the modularity and smart antenna connector features of the AP 3800.
Details the use of channel adapters for mounting APs to ceiling rails.
Explains how to mount an AP directly into a ceiling tile using a specific bracket.
Describes Oberon Wireless's in-tile and above-tile mounting solutions.
Provides guidance on wall mounting access points, considering signal obstacles.
Suggests using vinyl tape or covers to change AP color without voiding warranty.
Discusses AP design and material suitability for cleanroom environments.
Covers installing APs above ceiling tiles and considerations for RF performance.
Explains the FRA system, its components, and benefits.
Describes how clients move from a Macro cell to a Micro cell.
Describes how clients move from a Micro cell to a Macro cell.
Explains micro and macro cell configurations for internal antenna models.
Discusses RF operations and smart antenna connectors for E/P series APs.
Details the downlink and uplink ports of the 48-port Catalyst 3850 switch.
Details the downlink and uplink ports of the 24-port Catalyst 3850 switch.
Details changes in 5 GHz spectrum rules under the new FCC -B domain.
Compares security of Ethernet cable connection using Bracket-1 for AP 3800/3700.
Links to previous Cisco Aironet deployment guides and related topics.
Lists features of AP 3800 not available on AP 2800.
Explains how FRA reduces AP deployment and improves performance.
Explains the SMART antenna connector and its function on APs.
Lists proposed modules for the extension slot on AP 3800 models.
Explains the benefit of the side-mounted extension module slot.
Discusses the plastic material (Lexan 945) suitability for cleanroom environments.
Compares spatial streams between AP 1850 and AP 2800/3800.
Explains how AUTO-Link Aggregation works with AP 2800 and AP 3800.
Compares Cisco ClientLink 4.0 with standard 802.11ac Wave-2 beamforming.
Clarifies the inability to run mGig and gigE ports in LAG mode simultaneously.
Specifies the dBi gain for internal antennas on AP 2800i and AP 3800i.
Clarifies that PoE is only accepted on the primary Ethernet port.
States the system memory for the access point (DRAM and flash).
Refers to the RRM guide for understanding FRA and RRM.
Discusses TKIP support status and future plans for the product.
To Next Page