Cisco aironet 2800 series User Manual

Wall mounting units with internal antennas in the orientation shown in Figure 20: Avoid wall mounting
units with internal antennas should be avoided. AP 2800i & AP 3800i should use the Oberon mounting
bracket unless roaming is not an issue, example: hotspot, kiosk, or very small venue areas where large
uniform coverage is not needed.
Note
Figure 21: Third Party options to Wall Mount
Changing the Color of an AP
If there is a desire to change the color of an AP, rather than painting the AP which would void the warranty,
consider using colored vinyl tape or using a colored plastic cover from Oberon.
Figure 22: Third-party option for changing AP color, adding custom Logo, or hiding the LED
Cisco Aironet Series 2800/3800 Access Point Deployment Guide
21
Physical Hardware and Mounting Options
Changing the Color of an AP

Cisco aironet 2800 series Specifications

General

Frequency Bands	2.4 GHz and 5 GHz
MIMO	4x4
Spatial Streams	4
Wi-Fi Standards	802.11a/b/g/n/ac
Ethernet Ports	1 x Gigabit Ethernet
Power Options	802.3at PoE
Antenna	Internal or external antennas
Mounting	Ceiling, wall
Security	WPA2, 802.1X, AES
Management	Cisco Prime Infrastructure