Contents
vi
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-03
Routine Procedures 8-1
Inserting and Removing a PC Card 8-2
Inserting a PC Card into a Windows CE Device 8-2
Removing a PC Card from a Windows CE Device 8-2
Upgrading the Client Adapter Software 8-3
Upgrading the Firmware 8-3
Finding the Firmware Version 8-3
Loading New Firmware 8-4
Upgrading the Driver and Client Utilities 8-6
Finding the Driver and Client Utility Versions 8-7
Uninstalling the Current Driver and Client Utilities 8-8
Client Utility Procedures 8-8
Opening a Client Utility 8-8
Exiting a Client Utility 8-8
Finding the Version of a Client Utility 8-9
Deleting Client Utility Icons on HPC and Windows CE .NET Devices 8-10
CA and User Certificate Procedures (Host-Based EAP Only) 8-11
Viewing CA and User Certificates 8-11
Removing CA and User Certificates 8-12
Restarting the Client Adapter 8-12
Troubleshooting 9-1
Accessing the Latest Troubleshooting Information 9-2
Interpreting the Indicator LEDs 9-2
Troubleshooting the Client Adapter 9-3
Problems Obtaining an IP Address 9-3
Problems Associating to an Access Point 9-3
Problems Authenticating to an Access Point 9-4
Problems Connecting to the Network 9-4
Prioritizing Network Connections (Windows CE .NET Only) 9-4
Reauthenticating After LEAP Times Out 9-4
Error Messages 9-5
Getting Help 9-11
PPC Devices 9-11
HPC and Windows CE .NET Devices 9-11
To Next Page
Loading...
Need help?
General
