Contents
v
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-03
Additional WEP Key Security Features 5-11
Message Integrity Check (MIC) 5-11
Temporal Key Integrity Protocol (TKIP) 5-12
Broadcast Key Rotation 5-12
Synchronizing Security Features 5-13
Using Static WEP 5-14
Enabling Static WEP and Entering a New Static WEP Key 5-14
Overwriting an Existing Static WEP Key 5-15
Disabling Static WEP 5-16
Using LEAP 5-16
Enabling LEAP 5-16
Disabling LEAP 5-17
Using Host-Based EAP 5-17
Obtaining CA and User Certificates 5-18
Obtaining a CA Certificate 5-18
Obtaining a User Certificate 5-19
Enabling Host-Based EAP 5-20
Enabling EAP-TLS 5-21
Enabling PEAP 5-22
Disabling Host-Based EAP 5-23
Using EAP Authentication 6-1
Overview 6-2
Using LEAP 6-2
With a Temporary Username and Password 6-2
With a Saved Username and Password 6-4
Using EAP-TLS 6-4
Using PEAP 6-6
After Profile Selection, Card Insertion, or Reset 6-6
After Your Password Expires (Windows NT or 2000 Domain Databases Only) 6-7
Performing Diagnostics 7-1
Overview of ACU Diagnostic Tools 7-2
Setting Signal Strength Display Units 7-2
Viewing the Status of Your Client Adapter 7-3
Viewing Statistics for Your Client Adapter 7-5
To Next Page
Loading...
Need help?
General
