1-17
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring QoS
Monitoring QoS
Viewing QoS Standard Priority Statistics
To view statistics for service policies implementing the priority command, use the show service-policy
command with the priority keyword:
hostname# show service-policy priority
The following is sample output for the show service-policy priority command:
hostname# show service-policy priority
Global policy:
Service-policy: global_fw_policy
Interface outside:
Service-policy: qos
Class-map: TG1-voice
Priority:
Interface outside: aggregate drop 0, aggregate transmit 9383
Note “Aggregate drop” denotes the aggregated drop in this interface; “aggregate transmit” denotes the
aggregated number of transmitted packets in this interface.
Viewing QoS Shaping Statistics
To view statistics for service policies implementing the shape command, use the show service-policy
command with the shape keyword:
hostname# show service-policy shape
The following is sample output for the show service-policy shape command:
hostname# show service-policy shape
Interface outside
Service-policy: shape
Class-map: class-default
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
shape (average) cir 2000000, bc 8000, be 8000
The following is sample output of the show service policy shape command, which includes service
policies that include the shape command and the service-policy command that calls the hierarchical
priority policy and the related statistics:
hostname# show service-policy shape
Interface outside:
Service-policy: shape
Class-map: class-default
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
shape (average) cir 2000000, bc 16000, be 16000
To Next Page
Loading...
Need help?
General
