Cisco ASA 5515-X Cli Configuration Guide

1-12
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring SNMP
Information About SNMP
Supported Traps (Notifications)
Table 1-5 lists the supported traps (notifications) and their associated MIBs.
Table 1-5 Supported Traps (Notifications)
Trap and MIB Name Varbind List Description
authenticationFailure
(SNMPv2-MIB)
— For SNMP Version 1 or 2, the community
string provided in the SNMP request is
incorrect. For SNMP Version 3, a report
PDU is generated instead of a trap if the
auth or priv passwords or usernames are
incorrect.
The snmp-server enable traps snmp
authentication command is used to
enable and disable transmission of these
traps.
cefcFRUInserted
(CISCO-ENTITY-FRU-CONTROL-MIB)
—The snmp-server enable traps entity
fru-insert command is used to enable
this notification.
cefcFRURemoved
(CISCO-ENTITY-FRU-CONTROL-MIB)
—The snmp-server enable traps entity
fru-remove command is used to enable
this notification.

Cisco ASA 5515-X Specifications

General

Firewall Throughput	1.2 Gbps
Maximum Concurrent Sessions	250, 000
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Interfaces	6 x Gigabit Ethernet
IPsec VPN Throughput	200 Mbps
Memory	4 GB
Flash Memory	4 GB
Form Factor	1RU
IPS Throughput	250 Mbps
Concurrent Sessions	250, 000
Security Contexts	2
Power Supply	AC power supply (100-240V)