Cisco ASA 5515-X Cli Configuration Guide

1-19
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring SNMP
Configuring SNMP
• Sends traps (event notifications) to NMSs.
To enable the SNMP agent and identify an NMS that can connect to the SNMP server, enter the following
command:
Command Purpose
snmp-server enable
Example:
hostname(config)# snmp-server
enable
Ensures that the SNMP server on the ASA or ASASM is enabled. By default, the
SNMP server is enabled.

Cisco ASA 5515-X Specifications

General

Firewall Throughput	1.2 Gbps
Maximum Concurrent Sessions	250, 000
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Interfaces	6 x Gigabit Ethernet
IPsec VPN Throughput	200 Mbps
Memory	4 GB
Flash Memory	4 GB
Form Factor	1RU
IPS Throughput	250 Mbps
Concurrent Sessions	250, 000
Security Contexts	2
Power Supply	AC power supply (100-240V)