Cisco ASR-920-12SZ-A User Manual

Figure 10: Attaching Mounting Brackets to Router for a 19-Inch EIA Rack (Rear Position)
Depending on the rack on which you are installing the chassis, you may need to install either front, mid, or rear
mount brackets only.
Note
Step 2 Secure the bracket to the router with the recommended maximum torque of 10 inch-pounds (1.1 newton meters).
Set Up Device on Rack
Ensure adequate clearance when mounting the device on a rack.
Note
Install cable guides before installing the device in a 19 inches (48.3 centimeters) EIA rack.
Note
Step 1 Position the device on the rack, and use the images as a guide to set up the device.
Cisco ASR-920-12SZ-A and Cisco ASR-920-12SZ-D Aggregation Services Router Hardware Installation Guide
31
Install the Router
Set Up Device on Rack

Cisco ASR-920-12SZ-A Specifications

General

Brand	Cisco
Model	ASR-920-12SZ-A
Category	Network Router
Language	English