Cisco ASR-920-24SZ-M Installing

Step 3 Click Yes to uninstall the driver.
Connecting to the EIA Console Port
The US-to-RJ45 adapter cable and the DB9 console cable are not included with the Cisco ASR 920-24SZ-IM,
ASR-920-24SZ-M, ASR-920-24TZ-M Router; they can be ordered separately from Cisco.
Note
The serial console cable kit is not included with the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M,
ASR-920-24TZ-M Router; it is ordered separately.
Note
To connect a terminal to the EIA Console port on the router, follow these steps:
Procedure
Step 1 Connect the USB end of the USB-to RJ-45 cable to the EIA Console port.
Step 2 Connect the RJ-45 end of the DB-9 adapter cable to the USB-to RJ-45 cable, as shown in the figure below.
Figure 38: Connecting a Modem to the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router
USB-to-RJ-45 adapter2EIA Console port1
Desktop or system4RJ-45 to DB-9 cable3
Step 3 Connect the DB-9 end of the console cable to the DB-9 end of the terminal.
Step 4 To communicate with the router, start a terminal emulator application, such as Microsoft Windows
HyperTerminal. This software should be configured with the following parameters:
Installing the Router
48
Installing the Router
Connecting to the EIA Console Port

Cisco ASR-920-24SZ-M Specifications

General

Brand	Cisco
Model	ASR-920-24SZ-M
Category	Network Router
Language	English