Cisco ASR 920 series Hardware Installation Guide

3-2
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
OL-32751-01
Chapter 3 Installing the Cisco ASR 920 Series Router
Installing the Router in a Rack
Installing the Chassis Brackets
The chassis is shipped with mounting brackets that can be installed on the front or rear of the chassis.
To install the brackets on the front of the chassis, perform these steps:
Step 1 Remove the rack-mount brackets from the accessory kit and position them beside the router chassis.
Figure 3-1 shows how to attach the brackets at the front, middle, and rear positions on the
Cisco ASR 920 Series Router for a 19-inch EIA rack.
Figure 3-1 Attaching Mounting Brackets for a 19-inch EIA Rack (Front, Middle, and Rear Positions)
391640
391659

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English