Cisco ASR 920 series Installing Guide

DETAILED STEPS
PurposeCommand or
Action
Connect a USB
Type
Step 1
•
Installing the Cisco Microsoft Windows XP USB Driver, page 3-29
•
Installing the Cisco Microsoft Windows 2000 USB Driver, page 3-29
A-to-Type A
cable to the
•
Installing the Cisco Microsoft Windows Vista USB Driver, page 3-30
USB console
port, as shown
You cannot use the USB port and the EIA port concurrently. When the USB port is used, it takes priority over
the EIA port.
Note
in the figure
below. If you
are using the
USB serial port
for the first
time on a
Windows-based
PC, install the
USB driver
now according
to the
instructions in
the following
sections:
Connect the
USB Type A
cable to the PC.
Step 2
To
communicate
Step 3
•
9600 baud
•
8 data bits
with the router,
start a terminal
•
no parity
emulator
•
1 stop-bit
application,
such as
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
32
Installing the Cisco ASR 920 Series Router
Connecting Console Cables

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English