Cisco ASR 920 series Installing Guide

Connecting to the Console Port Using Mac OS X
This procedure describes how to connect a Mac OS X system USB port to the console using the built-in OS
X terminal utility.
SUMMARY STEPS
1.
Use the Finder to choose Applications > Utilities > Terminal.
2.
Connect the OS X USB port to the router.
3.
Enter the following commands to find the OS X USB port number:
4.
Connect to the USB port with the following command followed by the router USB port speed:
DETAILED STEPS
Step 1
Use the Finder to choose Applications > Utilities > Terminal.
Step 2
Connect the OS X USB port to the router.
Step 3
Enter the following commands to find the OS X USB port number:
Example:
macbook:user$ cd /dev
macbook:user$ ls -ltr /dev/*usb*
crw-rw-rw- 1 root wheel 9, 66 Apr 1 16:46 tty.usbmodem1a21 DT-macbook:dev user$
Step 4
Connect to the USB port with the following command followed by the router USB port speed:
Example:
macbook:user$ screen /dev/tty.usbmodem1a21 9600
To disconnect the OS X USB console from the terminal window, enter Ctrl-a followed by Ctrl-\
Connecting to the Console Port Using Linux
This procedure shows how to connect a Linux system USB port to the console using the built-in Linux terminal
utility.
SUMMARY STEPS
1.
Open the Linux terminal window.
2.
Connect the Linux USB port to the router.
3.
Enter the following commands to find the Linux USB port number:
4.
Connect to the USB port with the following command, followed by the router USB port speed:
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
34
Installing the Cisco ASR 920 Series Router
Connecting Console Cables

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP