Cisco ATA 186 Configuration Guide

CafeFone Configuration Guide for the Cisco ATA186
TABLE OF CONTENTS
INTRODUCTION _____________________________________________ 1
Requirements ______________________________________________________ 1
Support ___________________________________________________________ 1
SET UP YOUR ATA ____________________________________________ 1
CONFIGURE AN IP ADDRESS _________________________________ 1
Configure the ATA to Use DHCP _____________________________________ 2
Configure the ATA to Use Static IP Addressing _________________________ 2
CONFIGURE THE ATA’S ACCOUNT AND NETWORK SETTINGS __ 4
PLACE CALLS TO A TELEPHONE OUTSIDE THE NETWORK _____ 6
Page i

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports