Cisco ATA 186 Installation And Configuration Guide

Chapter 2 Installing the Cisco ATA 186
System Requirements
2-4
Cisco ATA 186 Installation and Configuration Guide
OL-1267-01
System Requirements
Caution The Cisco ATA 186 is intended for use with a 5V DC power adaptor only.
The Cisco ATA 186 installation package includes:
• Cisco ATA 186
• Cisco ATA 186 documentation
• 5V Power Adaptor
You also need:
• 10BaseT category-3 cable or better
• One or two analog touch-tone telephones
Note Telephones must be set to use tone, rather than pulse dialing for the
Cisco ATA 186 to operate correctly.

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports