3-2
Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
OL-21862-01
Chapter 3 Installing the ATA 187
Safety Recommendations
Safety Recommendations
To ensure general safety, follow these guidelines:
• Do not get this product wet or pour liquids into this device.
• Do not open or disassemble this product.
• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
• Use only the power supply that comes with the ATA 187.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Read the installation instructions before you connect the system to its power source.
Warning
The plug-socket combination must be accessible at all times because it serves as the main
disconnecting device.
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.
For translated warnings, see the Regulatory Compliance and Safety Information for the Cisco ATA 187
manual.
What the ATA 187 Package Includes
The ATA 187 package contains the following items:
• Cisco ATA 187 Analog Telephone Adaptor
• Cisco ATA 187 Analog Telephone Adaptor at a Glance
• Cisco ATA 187 Analog Telephone Adaptor (SIP) Product Safety and User Manual
• Regulatory Compliance and Safety Information for the ATA 187
• 12V power adaptor
• Power cord
Note The ATA 187 is intended for use only with the 12V DC power adaptor that comes with the unit.
To Next Page
Loading...
Need help?
General
