Name: Cisco ATA 187
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

CHAPTER

8-1

Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)

OL-21862-01

Voice Menu Codes

This section contains information on accessing the Interactive Voice Response (IVR) and a

quick-reference list of the voice configuration menu options for the ATA 187.

Accessing the IVR and Configuring Your Phone Setting

To access the IVR and configure your phone settings, follow these steps:

Note You can change the PIN on the Cisco Unified CM User Options web page.

Procedure

Step 1 To access the IVR, go off-hook on the phone connected to Line 1 and press the Set Up button on the

front panel of the ATA 187.

The IVR prompts for a password.

Note The ATA 187 allows you to enter only numerical values for password.

Step 2 Enter the PIN by pressing the number keypad, followed by # button.

You are at the IVR main configuration menu.

Step 3 Follow the voice prompts on the IVR. See Table 8-1 for information on navigating the IVR.

Step 4 To return to the main configuration menu, press #.

Step 5 To exit the IVR, end the call.

Other manuals for Cisco ATA 187

Questions and Answers:

Need help?

Do you have a question about the Cisco ATA 187 and is the answer not in the manual?

General