Cisco Catalyst 3550 Getting Started Guide

Getting Started Guide
Catalyst 3550 Multilayer Switch Getting Started Guide
INCLUDING LICENSE AND WARRANTY
1 About this Guide
2 Taking Out What You Need
3 Running Express Setup
4 Managing the Switch
5 Rack-Mounting
6 Connecting to DC Power
7 In Case of Difficulty
8 Obtaining Documentation
9 Obtaining Technical Assistance
10 Cisco Limited Lifetime Hardware Warranty Terms

Cisco Catalyst 3550 Specifications

General

Category	Switch
QoS	Yes
Form Factor	Rack-mountable
Manageable	Yes
RAM	64 MB
Model	Catalyst 3550
Uplink Ports	2 x GBIC (Gigabit Interface Converter) or SFP (Small Form-factor Pluggable)
Layer Support	Layer 3
VLAN Support	Yes
MAC Address Table Size	12000 entries
Routing Protocol	EIGRP
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Operating Humidity	10 - 95% (non-condensing)
Ports	24 or 48 10/100 ports