B-9
Multiprocessor WAN Application Module User Guide
OL-7469-04
Appendix B Troubleshooting
MWAM System Error Messages
Error Message %MWAM_FUR-1-INFO: "%s\n"
Explanation
Information about the Field-Upgradable ROMMON.
Recommended Action If this message recurs, copy the error message exactly as it appears on the
console or in the system log. Research and attempt to resolve the error using the Output Interpreter
“OUTPUT_INTERPRETER.” Also perform a search of the Bug Toolkit “BUG_TOOLKIT.” If you
still require assistance, open a case with the Technical Assistance Center via the Internet
“TAC_CASE_OPEN,” or contact your Cisco technical support representative and provide the
representative with the collected information.
System Error Messages
Error Message %MWAM-0-ADDRESS_TRAP: "Address trap: %d occurred on physical address:
0x%llx at EPC: 0x%x, ERR_EPC: 0x%x"
Explanation
A previously defined address trap has occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical
support representative.
Error Message %MWAM-0-UNCORRECTABLE_ECC_ERR: "An uncorrectable ECC error has
occurred, A_BUS_L2_ERRORS: 0x%llx, A_BUS_MEMIO_ERRORS: 0x%llx,
A_SCD_BUS_ERR_STATUS: 0x%llx"
Explanation
An uncorrectable ECC error has occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical
support representative.
Error Message %MWAM-0-CORRECTABLE_ECC_ERR: "A correctable ECC error has occurred,
A_BUS_L2_ERRORS: 0x%llx, A_BUS_MEMIO_ERRORS: 0x%llx, A_SCD_BUS_ERR_STATUS:
0x%llx"
Explanation
A correctable ECC error has occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical
support representative.
Error Message %MWAM-0-MISDIRECTED_INTERRUPT: "A misdirected interrupt occurred with
int_mask: 0x%x"
Explanation
A misdirected interrupt occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical
support representative.
To Next Page
Loading...
Need help?
General