Figure 5: After adjusting the rear rack posts
Installing Shelf Brackets and Crossbar in a Four-Post Rack with 17.75 inch (45.09 cm) Opening
You have to front-mount the shelf brackets and crossbar on a rack with a 17.75-inch rail-to-rail opening.Important
Perform these steps:
Before You Begin
You will require:
•
Number 1 and Number 2 Phillips screwdrivers
•
3/16-inch flat-blade screwdriver
•
Tape measure and level
Catalyst 6880-X Switch Hardware Installation Guide
10 OL-30827-02
Installing the Switch
Installing the Rack-Mount Shelf Kit
To Next Page
Loading...
