Cisco Catalyst 9136I Series - Unpacking Your Access Point; Package Contents; Unpacking the Access Point

To Next Page

To Previous Page

CHAPTER 3

Unpacking Your Access Point

• Package Contents, on page 13

• Unpacking the Access Point, on page 13

• Cisco Orderable Accessories, on page 14

Package Contents

Each AP package contains the following items:

• One C9136I AP

• Adjustable ceiling-rail clip (AIR-AP-T-RAIL-R or AIR-AP-T-RAIL-F—selected when you order the

access point)

• (Optional) Mounting bracket (AIR-AP-BRACKET-1= (default) or AIR-AP-BRACKET-2=, only if

selected when you order the access point)

• Cisco product documentation and pointer card

Unpacking the Access Point

To unpack the access point, follow these steps:

Procedure

Step 1 Unpack and remove the access point and the selected mounting accessory kit from the shipping box.

Step 2 Return the packing material to the shipping container and save it for future use.

Step 3 Verify that you have received all items ordered. If any item is missing or damaged, contact your Cisco

representative or reseller for instructions.

Cisco Catalyst 9136I Series Access Point Hardware Installation Guide

Other manuals for Cisco Catalyst 9136I Series