Cisco Catalyst 9136I Series - Checking the Access Point LEDs

The access point status LED indicates various conditions, which are described in the following table.
Table 2: LED Status Indications
Message MeaningLED StateMessage Type
Normal operating condition, but no
wireless client associated
GreenAssociation status
Normal operating condition, at least
one wireless client association
Blue
Executing boot loader
GreenBoot loader status
Boot loader signing verification
failure
Blinking GreenBoot loader error
Software upgrade in progressBlinking BlueOperating status
Discovery or join process in
progress
Alternating between Green and Red
General warning; insufficient inline
power
Cycling through
Red-Off-Green-Off-Blue-Off
Access point operating system
errors
Cisco Catalyst 9136I Series Access Point Hardware Installation Guide
23
Configuring and Deploying the Access Point
Checking the Access Point LEDs