Cisco Catalyst 9200 Series

Installing a Fan Module
• Fan Modules Overview , on page 1
• Installation Guidelines, on page 2
• Installing a Fan Module, on page 2
• Finding the Fan Module Serial Number, on page 3
Fan Modules Overview
Cisco Catalyst 9200 (C9200) Series switches support two field-replaceable fan modules providing N+1
redundancy support. The switch should be able to operate at ambient temperature if one of the fans fails.
Figure 1: Fan Module
Retainer clip3Extraction handles1
Fan LED2
Installing a Fan Module
1

Cisco Catalyst 9200 Series Specifications

General

Brand	Cisco
Model	Catalyst 9200 Series
Category	Switch
Language	English

Summary

Fan Modules Overview

Installation Guidelines

Installing a Fan Module Procedure

Remove Fan Module

Pinch the release handle and slide the fan module out. Replace within 5 minutes to avoid overheating.

Insert Fan Module

Insert the module firmly into the slot, ensuring it is flush with the rear panel. A green LED indicates operation.

Finding the Fan Module Serial Number