To Next PageTo Next PageHow to retrieve BFD adjacency information on a Cisco Catalyst 9500 Switch?
To retrieve BFD adjacency information on a Cisco Switch, first enable privileged EXEC mode. Then, use the command 'show bfd neighbors [details]'.
What to do if there is a lack of debugging information about BFD packets on a Cisco Switch?
If you lack debugging information about BFD packets on a Cisco Switch, use the command 'debug bfd [packet | event]'.
General| Series | Catalyst 9500 Series |
|---|---|
| Category | Switch |
| Software | Cisco IOS XE |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Fixed Uplink Modules | Varies by model |
| Stacking | Yes (StackWise Virtual) |
| Redundancy | Redundant power supplies and fans |
| Security | Advanced security features |
| PoE+ | Available (varies by model) |
| Power Supply Options | AC and DC options (varies by model) |
| Relative Humidity | 5% to 90% noncondensing |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Ports | Up to 48 ports (varies by model) |
