Cisco Catalyst IE3300 Series User Manual

4. Secure the 4 flathead phillips screws with 5-6 in-lbs torque
Connecting to Power
Tools and Equipment
Obtain these necessary tools and equipment:
• Ratcheting torque flathead screwdriver that exerts up to 18 in-lb (2.03 N-m) of pressure.
• For the protective ground connector, obtain a single or pair of stu size 6 ring terminals (such as
Hollingsworth part number R3456B or equivalent).
• Crimping tool (such as Thomas & Bett part number WT4000, ERG-2001, or equivalent).
• 10-gauge copper ground wire.
• For DC power connections, use UL- and CSA-rated, style 1007 or 1569 twisted-pair copper appliance
wiring material (AWM) wire.
• Wire-stripping tools for stripping 10- and 14-gauge wires.
• A number-2 Phillips screwdriver.
• A flat-blade screwdriver.
Switch Installation
9
Switch Installation
Connecting to Power

Cisco Catalyst IE3300 Series Specifications

General

Switching Capacity	Up to 128 Gbps
Forwarding Rate	Up to 95.23 Mpps
Product Type	Industrial Ethernet Switch
IP Rating	IP30
Software	Cisco IOS XE
Operating Temperature	-40°C to 75°C
Mounting	DIN Rail, Wall
Management	CLI, SNMP
Series	IE3300
PoE	PoE/PoE+
Input Voltage	12-48 VDC
Redundancy	Supports redundant power inputs