To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst IR1800 Rugged Series and is the answer not in the manual?
General| Brand | Cisco |
|---|---|
| Model | Catalyst IR1800 Rugged Series |
| Category | Wireless Router |
| Language | English |
Covers document purpose, audience, and conventions.
Details safety precautions and warnings for device installation.
Describes the general features of the Cisco IR1800 Series Router.
Details the different components and SKU variations of the IR1800 platform.
Explains the front and rear panel layouts and key ports.
Lists and describes pluggable modules like PIM, SSD, GPS, and SFP.
Covers Wi-Fi modules, Ethernet ports, power, LEDs, reset, and accessory support.
Details power supply, serial ports, and USB port specifications.
Covers general installation steps, safety precautions, and required tools.
Describes mounting the router on a wall, table, flat surface, or DIN rail.
Details attaching and orienting the DIN rail bracket for mounting.
Explains how to install the router's ground connection.
Provides information on choosing antennas for the IR1800 router.
Offers recommendations for optimal antenna placement and performance.
Lists compatible antennas, extension bases, and cables for the router.
Describes the process and highlights of installing pluggable interface modules.
Provides step-by-step instructions for installing pluggable interface modules.
Explains 5G Sub-6 GHz capabilities for IoT routing platforms.
Describes the 5G module and its indicator light behaviors.
Details RF band mapping and thermal mitigation strategies for the module.
Provides instructions on how to attach antennas to the 5G module.
Introduces the Cisco Wi-Fi Interface Module (WIM) and its features.
Guides through the process of installing the Wi-Fi Interface Module.
Details transmit power and receive sensitivity for Wi-Fi radios.
Explains thermal mitigation levels for the Wi-Fi module.
Provides an introduction to the Solid State Drive (SSD) module for the IR1800.
Details the steps for installing the SSD module into the router.
Describes the dedicated GPS FRU module for enhanced dead reckoning.
Provides instructions for installing and removing the GPS FRU module.
Outlines the digital I/O, ignition, and CAN bus connection details.
Details the input and output specifications for digital I/O ports.
Covers CAN Bus interface and On-Board Diagnostic (OBD-II) capabilities.
Outlines the overall connection process and preparation steps.
Guides on connecting a PC to the router's console port for configuration.
Details the procedures for connecting DC power and CAN bus wiring.
Introduces the IP54 kit for dust and water protection.
Provides instructions for installing the front and back covers of the IP54 kit.
Provides a general overview of the technical specifications for the IR1800.
Lists detailed design specifications including dimensions, weight, and environmental ratings.
Provides Class A notices and warnings related to EMC compliance.
Contains declarations of conformity with EU Directive 2014/53/EU for various countries.
Details national restrictions and requirements for wireless LAN usage in specific countries.
Explains compliance with international and national guidelines for RF exposure.
Covers Class 1 laser product statements and other compliance notices.
