Cisco Catalyst IR1800 Rugged Series - Page 5

Outdoor and Transportation Antennas 42
Supported Extension Bases and Cables 42
Pluggable Interface Modules 43
CHAPTER 5
Introduction to Installing Pluggable Interface Modules 43
Installing a PIM 44
5G Sub-6 GHz Pluggable Interface Module 49
CHAPTER 6
5G Sub-6 GHz Support on IoT Routing 49
5G Pluggable Interface Module Overview 50
LED Behaviors 51
RF Band and Port Mapping for the P-5GS6-GL Antenna 52
Thermal Mitigation 53
Attaching an Antenna 55
Cisco Wi-Fi Interface Module (WIM) 57
CHAPTER 7
Overview 57
Installation 59
Transmit Power and Receive Sensitivity 61
Thermal Mitigation 64
SSD Module 65
CHAPTER 8
Introduction to the Solid State Drive in the IR1800 Series 65
Installing an SSD Module 66
GPS Field Replaceable Unit Module 69
CHAPTER 9
Overview of the GPS FRU Module 69
Installation and Removal of a GPS FRU Module 70
Digital I/O, Ignition, and CAN Bus Connectivity 73
CHAPTER 10
Overview of the Digital I/O, Ignition, and CAN Bus Connectivity 73
Digital I/O Features 73
The Digital I/O Connector 73
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
v
Contents