Cisco CISCO1004-CH - 1004 Enet/ISDN/Bri Rter User Manual

Software Upgrade Process
ISSU Upgrade for Redundant Platforms
46
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Deleting file
bootflash:asr1000rp1-sipbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file
bootflash
:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file bootflash:packages.conf.00- ... done.
Deleting file bootflash:packages.conf.01- ... done.
Deleting file bootflash:packages.conf.02- ... done.
Deleting file bootflash:packages.conf.03- ... done.
Deleting file bootflash:packages.conf.04- ... done.
SUCCESS: Files deleted.
Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request platform command set)
This procedure can only be performed if the current ASR 1006 router or ASR 1013 router has two active
RPs and both RPs are running subpackages.
To perform an ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with
a du
al RP setup using the request platform command set, follow the following instructions.
SUMMARY STEPS
1. show version
show version active-rp in
stalled
show version stan
dby-rp installed
dir f
ilesystem:<directory>
show platform
2. mkdir URL-to-directory-name
3. ip tftp source-interface gigabitethernet slot/port
4. copy tftp: URL-to-target-location
5. request platform software package expand file URL-to-consolidated-package
6. dir URL-to-consolidated-package
7. copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
8. copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpcontrol.version.pkg
URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-standby-RP

Cisco CISCO1004-CH - 1004 Enet/ISDN/Bri Rter Specifications

General

Brand	Cisco
Model	CISCO1004-CH - 1004 Enet/ISDN/Bri Rter
Category	Network Router
Language	English