Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Configuring Cisco License Call Home
The Cisco License Call Home feature provides a robust set of commands that communicate with the
Cisco licensing infrastructure, makes connections and data transfers, and provides interactive prompts
to help you install and maintain software licenses. This module describes the tasks and the commands
used to activate software by using the Cisco License Call Home feature, license keys, and Cisco EXEC
commands. When you activate software from a Cisco device, you can license software without the need
for additional application software.
For more information on Cisco IOS XE Software A
ctivation conceptual overview, see the Software
Activation Configuration Guide, Cisco IOS XE Release 3S at this URL:
http://www.cisco.com/en/US/docs/ios-xml/ios/csa/configuration/xe-3s/csa-xe-3s-book.html
Finding Feature Information in This Module
Your software release might not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the “Feature Information for Cisco License
Call Home” section on page 10.
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. T
o access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
• Prerequisites for Cisco License Call Home, page 2
• Restrictions for Cisco License Call Home, page 2
• Informatio n About Cisco License Call Homes, page 2
• How to Configure Cisco License Call Home, page 3
• Configuration Examples for Cisco License Call Home, page 6
• Additional References, page 9
• Feature Information for Cisco License Call Home, page 10
To Next Page
Loading...
Need help?
General
