Software Upgrade Process
Upgrade Process With Service Impact for Nonredundant Platforms
133
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Blocking peer synchronization of operating information
Creating the command set placeholder directory
Finding latest command set
Finding latest command shortlist lookup file
Finding latest command shortlist file
Assembling CLI output libraries
Assembling CLI input libraries
Applying interim IPC and database definitions
Replacing running software
Replacing CLI software
Restarting software
*Sep 25 11:40:31.859: %IOSXE-4-PLATFORM: R0/0: kernel: scooby: Scooby: FD close
Restartin
g IOS PID: 21974, in slot/bay 0/0
FIXME: kill/restart security package: 0 0 rp_security
1 0 rp_security
Applying final IPC and database definitions
*Sep 25 11:40:59.590: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault
(PEER_NOT
_PRESENT)
*Sep 25 11:40:59.591: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_DOWN)
*Sep 25 11:40:59.591: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault
(PEER_RED
UNDANCY_STATE_CHANGE)
*Sep 25 11:41:02.177: %DYNCMD-7-CMDSET_UNLOADED: The Dynamic Command set from the Shell
Manager h
as been unloaded
*Sep 25 11:41:02.719: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been loaded
from the
Shell Manager
*Sep 25 11:41:05.397: %RF-5-RF_RELOAD: Peer reload. Reason: EHSA standby down Generating
software version
information
Notifying running software of updates
Unblocking peer synchronization of operating information
Unmounting old packages
Cleaning temporary installation files
Finished update running software
SUCCESS: Finished installing software.
Router#
*Sep 25 11:41:50.918: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: 0:0 is pre-release
hardware
*Sep 25 11:41:50.937: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby
insertion
(raw-event=PEER_FOUND(4))
*Sep 25 11:41:50.937: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby
insertion
(raw-event=PEER_REDUNDANCY_STATE_CHANGE(5))
Router#
Router# r
equest platform software package install rp 0 file
bootflash:asr1000rp1-{sipspa,sipbase}*02.02.01.122-33.XNB1*.pkg slot 0 force
--- Starting file path checking ---
Finished file path checking
--- Starting image file verification ---
Checking image file names
Verifying image file locations
Locating image files and validating name syntax
Inspecting image file types
Processing image file constraints
Creating candidate provisioning file
Finished image file verification
--- Starting candidate package set construction ---
Verifying existing software set
To Next Page
Loading...
Need help?
General
