Cisco CP-7821 Phone Set Quick Reference
Dial 9 + Tel No. + {Call}
Dial 9 + 001/0060 + Country Code + Area Code + Tel. no. + FAC
+ # + Password + # {Call}
IDD & chargeable Call password
To lock: [ * ][ 0 ][ 4 ] + {Call}, system will prompt to enter
password, (password) + [ # ]
To unlock: [ # ][ 0 ][ 4 ] + {Call}, system will prompt to enter
password, (password) + [ # ]
Speakerphone
Turn on (LED turns on)
Turn off (LED turns off)
[ Speaker ]
[ Speaker ] again
Headset
Turn on (LED turns on)
Turn off (LED turns off)
[ Headset ]
[ Headset ] again
Mute
Turn on microphone (LED turns on)
Turn off microphone (LED turns
off)
Internal :
[ Message ] + [*] [9] [0] or Press
Redial (redial the last no.)
To Hold: Call connected + press {Hold} or
To Reconnect: Press {Resume} or
To enable: [*] [1] [7] + {Call}
To disable: [#] [1] [7] + {Call}
Call Waiting
To response and put the current call on hold
To response and release the current call
{ Hold } / Pick the incoming line key (1
st
auto hold)
{ End Call } + {Resume}
Press {Transfer} + Extn No. + {Call} + Wait for answer +
{Transfer}
Press {Transfer} + Extn No. + {Call} + {Transfer}
Conference (max 15 parties)
Press {Conf} or + Extn No. / 9 + {Tel No.}+ {Call} +
Wait for answer + {Conf} or
Press [*] [1] [1] + Extn. No. + {Call}
(Sets up forwarding options for
incoming calls on your line.)
{Forward} + Extn. No.
1. Always (Enable: *05 + Extn No. o 9 + {Tel No.}
Disable: #05)
2. No Answer (Enable: *35 + Extn No. o 9 + {Tel No.}
Disable: #35)
3. Busy (Enable: *25 + Extn No. o 9 + {Tel No.}
Disable: #25)