Need help?Do you have a question about the Cisco IP Centrex SPA504G and is the answer not in the manual?
General| Lines | 4 |
|---|---|
| Protocols | SIP, SPCP |
| Ethernet Ports | 2 x 10/100BASE-T RJ-45 |
| Power | Power over Ethernet (PoE) or optional power adapter |
| Headset Port | Yes (2.5mm) |
| Speakerphone | Full-duplex speakerphone |
| Voice Codecs | G.711, G.729, G.722, G.726 |
| Weight | 900 g |
Instructions for sending calls to voicemail using softkey or extension.
Procedure to transfer an active call to another party using the transfer softkey.
Method for transferring a call without announcing it to the recipient.
Steps to activate and cancel call forwarding to another number.
How to configure call forwarding for unreachable numbers via MyAccount.
How to initiate intercom calls or page all extensions using specific codes.
Instructions for using programmed speed dial codes for quick dialing.
Procedure to answer a ringing extension within a pickup group.
How to activate and deactivate the Do Not Disturb feature.
Steps to add multiple participants to a conference call.
Instructions for parking and retrieving calls using codes.
Information on accessing Voice Portal for managing call forwarding.
Guide to configuring voicemail to be sent to an email address.
Description of LCD screen display elements and softkey button functions.
Explanation of line key status indicators and navigation button functions.
Description of keypad and buttons for volume, mute, headset, and speakerphone.
Step-by-step guide on initiating and receiving phone calls.
Instructions for customizing the phone's ring tone through the menu.
Methods for terminating an ongoing phone call.
Process for modifying call and ringer volumes using the phone buttons.
How to mute and un-mute the speakerphone or handset.
List of codes and functions available when the phone is not in use.
Descriptions of softkey functions available during an active call.
Descriptions of softkey functions available when a call is on hold.
To Next Page